| 國际标准: |
| ISO 2400-72E | 用于校准超声检测设备的钢焊件参考试块(用于t≤50mm钢管焊缝)(INDT,82-4)
Welds in steel -- Reference block forthe calibration of equipment for ultrasonic examination |
| ISO 4064-3-99 | 封闭管道中液體流量的测量使用速调整超声流量计法 |
| ISO 4386/1:1992 | 金属多层滑动轴承第1部分：粘接强度的超声无损检验
Plainbearings -- Metallic multilayer plain bearings -- Part 1:Non-destructive ultrasonic testing of bond |
| ISO 4386/2 | 金属多层滑动轴承第2部分：支承面金属层厚度≥2mm的粘接破坏性试验 |
| ISO 5180-80 | 超声检验用钢制校准试块 |
| ISO 5577:2000 | 无损检测--超声检测--术语
Non-destructive testing -- Ultrasonic inspection --Vocabulary |
| ISO 9303:1989 | 无缝和焊接(埋弧焊除外)承压钢管--探测纵向缺陷的全圆周超声检验
Seamless and welded (except submerged arc-welded) steeltubes for pressure purposes -- Full peripheral ultrasonictesting for the detection of longitudinal imperfections |
| ISO 9305:1989 | 无缝承压钢管--探测横向缺陷的全圆周超声检验
Seamless steel tubes for pressure purposes -- Full peripheral ultrasonic testing for the detection of transverse imperfections |
| ISO 9764:1989 | 電阻焊和感应焊承压钢管--探测焊缝纵向缺陷的超声检验
Electric resistance and induction welded steel tubes for pressure purposes -- Ultrasonic testing of the weld seam for the detection of longitudinal imperfections |
| ISO 9765:1990 | 埋弧焊承压钢管--探测焊缝纵向及/或横向缺陷的超声检验
Submerged arc-welded steel tubes for pressure purposes -- Ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections |
| ISO 10124:1994 | 受压无缝和焊制（埋弧焊除外）钢管分层缺陷的超声检测
Seamless andwelded (except submerged arc-welded) steel tubes for pressurepurposes -- Ultrasonic testing for the detection of laminarimperfections |
| ISO 10332:1994 | 受压无缝和焊制（埋弧焊除外）钢管验证水压密封性的超声检测
Seamless andwelded (except submerged arc-welded) steel tubes for pressurepurposes -- Ultrasonic testing for the verification of hydraulicleak-tightness |
| ISO 10375:2002 | 无损检测--超声检验--探头及其声场的表征
Non-destructive testing -- Ultrasonic inspection - - Characterization of search unit and sound field |
| ISO 10543:1993 | 无缝和热拉缩径焊接承压钢管--全圆周超声厚度检查
Seamless and hot-stretch-reduced welded steel tubes for pressure purposes -- Full peripheral ultrasonic thickness testing |
| ISO 11496:1993 | 无缝和焊接承压钢管--探测管端头分层缺陷的超声检验
Seamless and welded steel tubes for pressure purposes -- Ultrasonic testing of tube ends for the detection of laminar imperfections |
| ISO12094:1994 | 受压焊制钢管焊制钢管制造用钢带/钢板分层缺陷的超声检测
Welded steel tubes for pressure purposes -- Ultrasonic testingfor the detection of laminar imperfections in strips/plates used inthe manufacture of welded tubes |
| ISO12710:2002 | 无损检测 超声检测超声检测仪的電子特性评估
Non-destructive testing -- Ultrasonic inspection -- Evaluatingelectronic characteristics of ultrasonic test instruments |
| ISO 12713:1998 | 无损检测--声发射检测--换能器的初次校正
Non-destructive testing -- Acoustic emission inspection -- Primary calibration of transducers |
| ISO 12714:1999 | 无损检测--声发射检查--声发射传感器的二次校准
Non-destructive testing -- Acoustic emission inspection -- Secondary calibration of acoustic emission sensors |
| ISO 12715:1999 | 无损检测--超声检测--表征接触式探头声束轮廓的参考试块和测试方法
Ultrasonic non-destructive testing -- Referenceblocks and test procedures for the characterization of contactsearch unit beam profiles |
| ISO 12716:2001 | 无损检测--声发射检验--术语
Non-destructive testing -- Acousticemission inspection -- Vocabulary |
| ISO13663:1995 | 受压焊制钢管焊缝附近分层缺陷的超声检测
Welded steeltubes for pressure purposes -- Ultrasonic testing of the areaadjacent to the weld seam for the detection of laminarimperfections |
| ISO 17640:2005 | 焊缝无损检测--焊缝超声检测
Non-destructive testing of welds --Ultrasonic testing of welded joints |
| ISO 18175:2004 | 无损检测--超声脉冲回波检测系统工作特性评价（不用電子测量仪器）
Non-destructive testing -- Evaluating performancecharacteristics of ultrasonic pulse-echo testing systemswithout the use of electronic measurement instruments |
| ISO DIS 12709:1998 | 用超声脉冲回波水浸法检测和评价缺陷 |
| ISO 22825:2006 | 焊缝无损检测--超声检测--奥氏體不锈钢与镍基合金焊缝的检测
Non-destructive testing of welds -- Ultrasonic testing --Testing of welds in austenitic steels and nickel-basedalloys |
| ISO 23279 | 焊缝无损检测--超声检测--焊缝的指示特征 |
| ISO/CD 25902-2 | 钛管无损检测--第2部分：超声检验 |
| ISO/DP4992-83 | 铸钢件的超声波检测(INDT,85-2) |
| ISO(1984-02-07) | 铸钢件超声波探伤草案(WSTS,88-4,5) |
| IIWVC-421-83,VF-141-83 | 焊缝常规超声检验验收标准(7-100mm铁素體钢对接焊缝)(INDT,85-3) |
| IIW DOC V-527-76 | 焊缝超声检验手册 |
| IIW DOC V-664-79 | 用AVG图直接评估超声反射信号的验收标准(NDT,80-2) |
| 欧洲标准化委员会标准： |
| EN 583/1:1998 | 无损检测 超声检验第1部分：一般原理
Non-destructivetesting-Ultrasonic examination-Part 1:General principles |
| EN 583/2:2001 | 无损检测 超声检验第2部分：灵敏度和范围的调整（NDI，2004.4）(NDT2005.8)
Non-destructive testing-Ultrasonicexamination-Part 2:Sensitivity and range setting |
| EN 583/3:1999 | 无损检测 超声检验第3部分：透射技术
Non-destructivetesting-Ultrasonic examination-Part 3:Transmission technique |
| EN 583/4:2002/A1:2003 | 无损检测 超声检验第4部分：垂直于表面的不连续性的检验
Non-destructive testing-Ultrasonic examination-Part4:Examination for discontinuities perpendicular to thesurface |
| EN 583/5:2000/A1:2003 | 无损检测 超声检验第5部分：缺陷的表征和尺寸确定
Non-destructive testing-Ultrasonic examination-Part5:Characterization and sizing of discontinuities |
| ENV 583/6:2000 | 无损检测 超声检验第6部分：用于缺陷探测和定量的衍射时差法
Non-destructive testing-Ultrasonic examination-Part6:Time-of-flight diffraction technique as a method for detectionand sizing of discontinuities |
| EN 1330/4:2000 | 无损检测词汇 超声检测所用术语
Non-destructivetesting-Terminology-Part 4:Terms used in ultrasonic testing |
| EN 1330/9:2000 | 无损检测词汇 声发射检测所用术语 |
| EN 1712:1998(2003) | 焊接的无损检验 焊接接头的超声检验验收等级
Non-destructive examination of welds-Ultrasonic examination of weldedjoints-Acceptance levels |
| EN 1713:1998(2003) | 焊接的无损检验 超声检验焊缝中的显示特征
Non-destructive examination of welds-Ultrasonicexamination-Characterization of indications in welds |
| EN 1714:1997(2003) | 焊接的无损检验焊接接头的超声检验
Non-destructive examination of welds-Ultrasonicexamination of welded joints |
| EN 10160:1999 | 厚度等于或大于6mm钢制平产品厚度的超声检测 |
| EN 10228/3:1998 | 钢锻件无损检测铁素體或马氏體钢锻件的超声检测 |
| EN 10228/4:1999 | 钢锻件无损检测奥氏體和奥氏體铁素體不锈钢锻件的超声检测 |
| EN 10246/6:1999 | 钢管的无损检测无缝钢管横向缺陷的全圆周超声检测 |
| EN 10246/7:1996 | 钢管的无损检测无缝和焊接（埋弧焊除外）钢管纵向缺陷的自动全圆周超声检测 |
| EN 10246/8:1999 | 钢管的无损检测電焊钢管焊缝纵向缺陷的自动超声检测 |
| EN 10246/9:2000 | 钢管的无损检测埋弧焊钢管焊缝纵向及/或横向缺陷的自动超声检测 |
| EN 10246/13:2000 | 钢管的无损检测无缝和焊接（埋弧焊除外）钢管全圆周自动超声测厚 |
| EN 10246/14:1999 | 钢管的无损检测无缝和焊接（埋弧焊除外）钢管层状缺陷的自动超声检测 |
| EN 10246/15:2000 | 钢管的无损检测制造焊接钢管用的带材/中厚板层状缺陷的自动超声检测 |
| EN 10246/16:2000 | 钢管的无损检测焊接钢管焊缝附近區域层状缺陷的自动超声检测 |
| EN 10246/17:2000 | 钢管的无损检测无缝和焊接钢管管端面层状缺陷的超声检测 |
| EN 12223:2000 | 无损检测 超声检验1号校准块规范
Non-destructivetesting-Ultrasonic examination-Specification for calibration blockNo.1 |
| EN 12668/1:2000/A1:2004 | 超声检验设备的特性和校验第1部分：仪器
Non-destructivetesting-Characterization and verification of ultrasonic examinationequipment-Part 1:Instruments |
| EN 12668/2:2001/A1:2004 | 超声检验设备的特性和校验第2部分：探头
Non-destructivetesting-Characterization and verification of ultrasonic examinationequipment-Part 2:Probes |
| EN 12668/3:2000/A1:2004 | 超声检验设备的特性和校验第3部分：组合设备
Non-destructivetesting-Characterization and verification of ultrasonic examinationequipment-Part 3:Combined equipment |
| EN 13477/1:2001 | 无损检测 声发射 设备表征第1部分：设备描述
Non-destructivetesting-Acoustic emission-Equipment characterisation-Part1:Equipment description |
| EN 13477/2:2001 | 无损检测 声发射 设备表征第2部分：工作特性的校验
Non-destructive testing-Acoustic emission-Equipmentcharacterisation-Part 2:Verification of operatingcharacteristic |
| EN 13554:2002/A1:2003 | 无损检测 声发射 一般原理Non-destructive testing-Acousticemission-General principles |
| EN 138052-1:2001 | 超声测厚 |
| EN 138052-2:2001 | 超声自动检测 |
| EN 14127:2004 | 无损检测 超声测厚Non-destructive testing-Ultrasonicthickness measurement |
| CEN/TS 14751:2004 | 焊缝超声TOFD法检测 |
| EN 27963:1992 | 用于焊缝超声检验的2号校准试块规范
Weldsin steel-Calibration block No.2 for ultrasonic examination ofwelds(ISO 7963:1985) |
| EN 61161: | 在液體中频率范围0.5MHz~25MHz超声功率测量规范 |
| EN WI-188:1999 | 奥氏體钢焊缝超声检测方法 |
| EN WI-189:1999 | 铝和铝合金焊缝超声检测方法 |
| EN WI-190:1999 | 金属焊缝超声自动检测方法 |
| EN WI-191:2000 | 钢電子束和激光焊缝超声检测方法 |
| 前苏联标准: |
| гост 21397-75 | 铝合金制品超声检测用标准试块的基本参数与技术要求 |
| гост 23702-79 | 超声换能器基本参数及其测量方法(INDT,83-3) |
| гост 23667-79 | 超声探伤仪基本参数测量方法 |
| гост 23049-78 | 超声检测的一般技术要求 |
| гост 22727-77 | 薄钢板致密性的超声检测 |
| гост 22368-77 | 对接焊缝超声检测的缺陷分类 |
| гост 21120-75 | 圆,方,矩形截面棒材与坯料的超声回波法检测 |
| гост 20415-82 | 声學检测一般规则 |
| гост 18576-80 | 铁路钢轨的超声检测 |
| гост 17410-78 | 圆柱形无缝金属管的超声检测 |
| гост 14782-76 | 焊缝的超声检测 |
| гост 12503-75 | 钢的超声检测一般要求 |
| гост 51017-71 | 涡轮机K-200-130-1转子锻件制造标准(含超声检测标准) |
| ПИ1.2. 032-77 | 航空发动机涡**和压气机盘的超声检验 |
| OCT1 90250-77 | 无损检验 用于航空技术装备的半成品和零件的超声检验对检验方法内容和编制的一般要求 |
| ISO 5948-81E | 铁路机車車辆部件的超声波验收试验(車辆,車轮及轮箍)(NDT,87-4) |
| ISO5948:1994(E) | 铁道車辆材料-超声波验收检验(NDT2002-3)
Railwayrolling stock material -- Ultrasonic acceptance testing |
| ISO 6721/8:1997 | 塑料-动态力學性能的测定第8部分：纵波和横波传播法 |
| ISO 6721/9:1997 | 塑料-动态力學性能的测定 第9部分：拉伸振动-声脉冲传播法 |
| ISO 7963:2006 | 无损检测--超声检测--钢焊缝--2号校正试块的规范
Welds insteel -- Calibration block No. 2 for ultrasonic examination ofwelds |