| 國际标准: |
| ISO2178:1982 | 在磁性基體上的非磁性复盖层--复盖层厚度测量--磁测法
Non-magnetic coatings on magnetic substrates -- Measurement of coating thickness-Magnetic method |
| ISO2360:2003 | 在非磁性金属基體上的非导電复盖层--复盖层厚度测量--涡流法
Non-conductive coatings on non-magneticelectrically conductive basis materials-Measurement of coatingthickness- Amplitude-sensitive eddy current method |
| ISO2361-82E | 磁性和非磁性基體上镀镍层厚度的磁性测量方法(NDT,87-2) |
| ISO2361:1982 | 在磁性和非磁性基體上的電镀层--镀层厚度测量--磁测法
Electrodeposited nickel coatings on magnetic and non-magnetic substrates-Measurement of coating thickness -- Magnetic method |
| ISO N237 | 铸钢件的磁粉探伤 |
| ISO3059:2002 | 无损检测渗透检验和磁粉检验 观察条件 黑光源的间接评定方法（TC135） |
| ISO4309-1981 | 起重机械用钢丝绳检验和报废实用规范 |
| ISO5065/1 | 磁粉检验指示器-第1部分:特性 |
| ISO5065/2 | 磁粉检验指示器-第2部分:试验 |
| ISO DP5578 | 磁粉检验用磁化设备 |
| ISO4986:1992 | 钢铸件-磁粉检验
Steel castings-Magnetic particle inspection |
| ISO6933:1986 | 铁道轧材--磁粉验收试验
Railway rolling stock material -- Magnetic particle acceptance testing |
| ISO9302:1994 | 无缝和焊接( 埋弧焊除外)承压钢管--验证液压密封性的電磁检验
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes-Electromagnetic testing for verification of hydraulic leak-tightness |
| ISO9304:1989 | 无缝和焊接( 埋弧焊除外)承压钢管--探测缺陷的涡流检验
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes-Eddy current testing for the detection of imperfections |
| ISO9402:1989 | 无缝和焊接( 埋弧焊除外)承压钢管--探测铁磁性钢管纵向缺陷的全圆周磁传感器/ 漏磁检验
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes-Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections |
| ISO9598:1989 | 受压无缝钢管探测铁磁性钢管横向缺陷的全圆周磁传感器/ 漏磁检验
Seamless steel tubes for pressure purposes-Fullperipheral magnetic transducer/flux leakage testing offerromagnetic steel tubes for the detection of transverseimperfections |
| ISO9934-1:2001 | 无损检测--磁粉检测--第1部分:总则
Non-destructive testing-Magnetic particle testing-Part 1:General principles |
| ISO9934-2:2002 | 无损检测--磁粉检测--第2部分:检测介质
Non-destructive testing-Magnetic particletesting-Part 2: Detection media |
| ISO9934-3:2002 | 无损检测--磁粉检测--第3部分:设备
Non-destructive testing-Magnetic particle testing-Part 3:Equipment |
| ISO 12718 | 无损检测--涡流检测--词汇 |
| ISO13664:1997 | 无缝和焊制承压钢管管端分层缺陷的磁粉检测
Seamless and welded steel tubes for pressure purposes-Magneticparticle inspection of the tube ends for the detection of laminarimperfections |
| ISO13665:1997 | 无缝和焊制承压钢管管體表面缺陷的磁粉检测
Seamless and welded steel tubes for pressure purposes-Magneticparticle inspection of the tube body for the detection of surfaceimperfections |
| ISO 15548-1 | 无损检测--涡流检验设备--仪器特性与校验 |
| ISO 15548-2 | 无损检测--涡流检验设备--探头特性与校验 |
| ISO 15548-3 | 无损检测--涡流检验设备--系统特性与校验 |
| ISO15549:1999 | 无损检测--涡流检验--一般原理 |
| ISO 17638:2003 | 焊缝无损检测--磁粉检测
Non-destructive testing ofwelds-Magnetic particle testing |
| ISO 17643:2005 | 焊缝无损检测--利用复平面分析的涡流检测
Non-destructive testing of welds-Eddy current testing of weldsby complex-plane analysis |
| ISO 23278:2006 | 焊缝无损检测--焊缝的磁粉检测--验收等级 |
| ISO 24497-1 | 无损检测--金属磁存储器-第1部分:一般要求 |
| ISO 24497-2 | 无损检测--金属磁存储器-第2部分:术语与定义 |
| ISO 24497-3 | 无损检测--金属磁存储器-第3部分:焊缝的检验 |
| ISO 25902-1 | 钛管无损检测--第1部分:涡流检验 |
| 欧洲标准化委员会标准： |
| EN1290:1998 | 焊缝无损检测焊缝的磁粉检验
Non-destructive examination of welds-Magnetic particleexamination of welds |
| EN1291:1998 | 焊缝无损检测焊缝的磁粉检验 验收等级
Non-destructive examination of welds-Magnetic particle testing of welds-Acceptance levels |
| EN1330/5:1998 | 无损检测词汇涡流检测所用术语
Non-destructive testing-Terminology-Part 5:Terms used in Eddycurrent testing |
| EN1369:1996 | 铸件磁粉检查 |
| EN1711:2000 | 焊缝无损检测基于复平面分析的焊缝涡流检测
Non-destructive examination of welds-Eddy current examination of welds by complex plane analysis |
| EN1956: | 无损检测渗透检测和磁粉检测 |
| EN1971: | 铜和铜合金的涡流检测 |
| EN2857/1: | 磁粉检测总则 |
| EN2857/2: | 检查要求 |
| EN ISO 3059:2001 | 无损检测 渗透检测和磁粉检测观察条件
Non-destructivetesting-Penetrant testing and magnetic particle testing-Viewingconditions(ISO 3059:2001) |
| EN ISO9934-1:2001/A1:2003 | 无损检测 磁粉检测第1部分：一般原理
Non-destructivetesting-Magnetic particle testing-Part 1:General principles(ISO9934-1:2003) |
| EN ISO 9934-2:2002 | 无损检测 磁粉检测第2部分：检测介质
Non-destructivetesting-Magnetic particle testing-Part 2:Detection media(ISO9934-2:2002) |
| EN ISO 9934-3:2002 | 无损检测 磁粉检测第3部分：设备
Non-destructivetesting-Magnetic particle testing-Part 3:Equipment(ISO9934-3:2002) |
| EN10228/1:1999 | 磁粉检查 |
| EN10246/1:1996 | 无缝与焊接（埋弧焊除外）铁磁性钢管的自动電磁检测-验证液压密封性 |
| EN10246/2:2000 | 无缝与焊接（埋弧焊除外）奥氏體和奥氏體铁素體钢管的自动涡流检测-验证液压密封性 |
| EN10246/3:1999 | 无缝与焊接（埋弧焊除外）钢管的自动涡流检测-探伤 |
| EN10246/4:1999 | 无缝铁磁性钢管的自动全圆周磁传感器/漏磁检测-检测横向缺陷 |
| EN10246/5:1999 | 无缝与焊接（埋弧焊除外）铁磁性钢管的自动全圆周磁传感器/漏磁检测-检测纵向缺陷 |
| EN10246/12:2000 | 无缝与焊接铁磁性钢管的磁粉检测-检测表面缺陷 |
| EN10246/18:2000 | 无缝与焊接铁磁性钢管管端面的磁粉检测-检测层状缺陷 |
| EN12084:2001/A1:2003 | 无损检测 涡流检测一般原理和指南
Non-destructivetesting-Eddy current testing-General principles and guidelines |
| EN 13860-1:2003 | 无损检测 涡流检测设备性能与验证 第1部分：仪器性能与验证
Non-destructive testing-Eddy current examination-Equipmentcharacteristics and verification-Part 1:Instrument characteristicsand verification |
| EN 13860-2:2003 | 无损检测 涡流检测设备性能与验证 第2部分：探头性能与验证
Non-destructive testing-Eddy current examination-Equipmentcharacteristics and verification-Part 2:Probe characteristics andverification |
| EN 13860-3:2003 | 无损检测 涡流检测设备性能与验证 第3部分：系统性能与验证
Non-destructive testing-Eddy current examination-Equipmentcharacteristics and verification-Part 3:System characteristics andverification |
| EN WI45:2002 | 涡流检测设备 |
| 美國相关标准 |
| 日本: |
| JIS C2501-1998 | 長久磁铁试验方法 Methods of test for permanent magnet |
| JIS G0565-1992 | 铁磁性材料磁粉检验方法及磁粉显示等级 (INDT,84-2 1982年版)
METHOD FOR MAGNETIC PARTICLE TESTING OF FERROMAGNETIC MATERIALS AND CLASSIFICATION OF MAGNETIC PARTICLE INDICATION |
| JIS G0568-1993 | 钢制产品的环绕線圈法涡流检测
Methodfor eddy current testing of steel products by encircling coiltechnique |
| JIS G0583-2004 | 钢管的涡流检验方法 Eddy currentexamination of steel pipes and tubes |
| JIS H0502-1986 | 铜及铜合金管的涡流检测方法
METHOD OFEDDY CURRENT TESTING FOR COPPER AND COPPER ALLOY PIPES ANDTUBES |
| JIS H 0505-1975 | 有色金属材料的電阻率及导電率测定方法
Measuring methods for electrical resistivity and conductivityof non-ferrous materials |
| JIS H 0515-1992 | 钛管的涡流检验 Eddy currentinspection of titanium pipes and tubes |
| JIS H 0601:62 | 锗的電阻率测定方法 |
| JIS H 0602:95 | 硅单晶及硅薄片的四探针法電阻率测定方法 |
| JIS Z 2314-1991 | 涡流试验仪器性能特性试验方法
Testmethods for performance characteristics of eddy current testinginstruments |
| JIS Z 2315-1991 | 涡流探伤系统性能特性试验方法
TESTMETHODS FOR PERFORMANCE CHARACTERISTICS OF EDDY CURRENT FLAWDETECTING SYSTEM |
| JIS Z 2319-1991 | 漏磁试验方法Methods for magnetic leakage fluxtesting |
| JIS Z 2321-1993 | 用于磁粉检测的交流磁轭 AC YOKE MAGNETFOR MAGNETIC PARTICLE TESTING |
| JIS Z 2340:2002 | 磁粉和渗透检验中目视校验计较准方法的确认
Confirmation method of calibration by visual calibration gauge onmagnetic particle and liquid penetrant testing |
| JIS Z 2343-3:2001 | 无损检测 渗透检测 第3部分：参考试块
Non-destructive testing -- Penetrant testing -- Part 3: Referencetest blocks |
| JIS Z 8202-5-2000 | 量值和单位 第5部分:電學和磁學Quantities and units - Part 5:Electricity and magnetism |
| JIS W 1202-1986 | 宇航用涡流法对铝合金热处理测量的電导试验
Electrical conductivity test formeasurement of heat treatment of aluminum alloys, eddy currentmethod, for aerospace use |
| JIS W4031-82 | 宇航用磁粉检验方法 INSPECTIONPROCESS OF MAGNETIC PARTICLE FOR AEROSPACE USE |
| NDIS3101-84 | 涡流探伤装置单项性能的测试及其表示方法 |
| NDIS3102-84 | 涡流探伤装置综合性能的测试及其表示方法 |
| NDIS3301-77 | 磁粉探伤用C1型标准试片 |
| NDIS3404-82 | 漏磁探伤测试方法(INDT,85-3) |
| NDIS3105-83 | 交流磁轭磁粉检验装置性能与试验方法 |
| NDIS3403-81 | 表面缺陷检测方法 |
| 德國: |
| DIN 50470-1980 | 永磁材料的检测 测定磁轭的退磁曲線和永磁导磁率感应法
Testing of permanentmagnet materials; Determination of the demagnetization curve andpermanent permeability in a yoke; Inductive method |
| DIN 50472-1981 | 長久磁铁的检测在工作范围内测定磁通量值
Testing ofpermanent magnets; determination of the magnetic flux values in theworking range |
| DIN 50933-1987 | 用探针式差动测量器测量涂层厚度
Measurement of coating thickness bydifferential measurement using a stylus instrument |
| DIN50981-79 | 用磁粉法测量铁素體材料非铁磁性层的厚度 |
| DIN50984-78 | 用涡流法测量非铁素體母材的非导電层厚度 |
| DIN50985-77 | 用電容法测量导電母材上非导電层的厚度 |
| DIN54121-65 | 磁粉探伤定义及检验证明 |
| DIN 54130-1974 | 无损检测 漏磁检测 通则
Non-destructive testing; magneticleakage flux testing, general |
| DIN54131T1-84 | 除携带式以外的固定式与移动式磁粉检验设备性能及测定方法 |
| DIN54131T2-84 | 携带式磁粉检验设备性能及测定方法 |
| DIN54132-80 | 磁粉检验介质的性能测定 |
| DIN 54136-1-1988 | 无损检测 带扫描探头的漏磁检测原理
Non-destructive testing;magnetic leakage flux testing by scanning with probes;principles |
| DIN 54140-3-1989 | 无损检测 電磁法测试線圈组件的图像和一般特性
Non-destructive testing; electromagnetic methods;representation and general characteristics of test coilassemblies |
| DIN54140T1-76 | 電磁(涡流)法检测的一般规则 |
| DIN54140T2-84 | 電磁检测名词术语 |
| DIN 54141-1-1982 | 无损检测 管子的涡流检测用同心试验線圈和单频率法检测的一般注意事项
Non-destructive testing; Eddy current testing of pipes andtubes; General remarks on testing using concentric test coils andthe single-frequency method |
| DIN 54141-2-1982 | 无损检测 管子的涡流检测同心试验線圈的涡流检测系统性能测定与校验的参考方法 Non-destructive testing; Eddy current testing of pipes andtubes; Reference method for the determination and calibration ofthe properties of an eddy current testing system using concentrictest coils |
| DIN 54141-3-1987 | 无损检测 管子的涡流检测 方法
Non-destructive testing; eddy currenttesting of pipes and tubes; procedure |
| DIN54141T1-82 | 穿过式線圈单频法管材涡流检测(NDT,86-1) |
| DIN54141T2-82 | 穿过式線圈涡流检验装置性能的测定方法 |
| DIN54141T3-85 | 涡流检测的实施 |
| DIN25435T2-79 | 核技术设备定期磁粉检验 |
| DIN V VDE V0848-4/A3-1995 | 電磁场中的**性 在0至30KHz频率范围的人员防护修订3
Safety inelectromagnetic fields - Protection of persons in the frequencyrange from 0 to 30 kHz; Amendment A3 |
| DIN EN 1290-2002 | 焊缝的无损检测 焊缝的磁粉检测
Non-destructive testing of welds -Magnetic particle testing of welds; German version EN 1290:1998 +A1:2002 |
| DIN EN 1291-2002 | 焊缝的无损检测 焊缝的磁粉检测验收等级
Non-destructivetesting of welds - Magnetic particle testing of welds - Acceptancelevels; German version EN 1291:1998 + A1:2002 |
| DIN EN 1330-5-1998 | 无损检测术语第5部分:涡流检测
Non-destructivetesting - Terminology - Part 5: Terms used in Eddy Current testing;trilingual version EN 1330-5:1998 |
| DIN EN 1369-1997 | 铸造 磁粉检验 Founding - Magnetic particle inspection; German version EN 1369:1996 |
| DIN EN 1971-1998 | 铜和铜合金 管子的涡流检测
Copper and copper alloys - Eddycurrent test for tubes; German version EN 1971:1998 |
| DIN EN 1711-2000 | 焊缝的无损检验焊缝的复平面分析涡流检验
Non-destructive examination of welds - Eddy current examinationof welds by complex plane analysis; German version EN1711:2000 |
| DIN EN 10228-1-1999 | 钢锻件的无损检测第1部分:磁粉检验
Non-destructivetesting of steel forgings - Part 1: Magnetic particle inspection;German version EN 10228-1:1999 |
| DIN EN 10246-1-1996 | 钢管的无损检测第1部分:验证无缝和焊接铁磁钢管(埋弧焊除外)水压密封性的自动電磁检测 Non-destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness; German version EN 10246-1:1996 |
| DIN EN10246-3-2000 | 钢管的无损检测第3部分:探测无缝和焊接钢管(埋弧焊接除外)不完整性的自动涡流检测Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections; German version EN 10246-3:1999 |
| DIN EN 10246-4-2000 | 钢管的无损检测第4部分:探测铁磁无缝钢管横向不完整性的自动全圆周磁探头/磁漏检测 Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections; German version EN 10246-4:1999 |
| DIN EN 10246-5-2000 | 钢管的无损检测第5部分:探测无缝和焊接(埋弧焊接除外)铁磁钢管纵向不完整性的自动全圆周磁探头/磁漏检测 Non-destructive testing of steel tubes - Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal imperfections; German version EN 10246-5:1999 |
| DIN EN10246-18-2000 | 钢管的无损检测第18部分:探测无缝和焊接铁磁钢管管端层状不完整性的磁粉检验 Non-destructive testing of steel tubes - Part 18: Magnetic particle inspection of the tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections; German version EN 10246-18:2000 |
| DIN EN 12084-2001 | 无损检测 涡流检测一般原理和基本指南
Non-destructivetesting - Eddy current testing - General principles and basicguidelines; German version EN 12084:2001 |
| DIN EN 13860-1-2003 | 无损检测 涡流检验 设备特性和验证第1部分:仪器特性和验证
Non-destructive testing - Eddy current examination; Equipmentcharacteristics and verification - Part 1: Instrumentcharacteristics and verification; German version EN13860-1:2003 |
| DIN EN 13860-2-2003 | 无损检测 涡流检验 设备特性和验证第2部分:探头特性和验证
Non-destructive testing - Eddy current examination; Equipmentcharacteristics and verification - Part 2: Probe characteristicsand verification; German version EN 13860-2:2003 |
| DIN EN ISO2178-1995 | 磁性基體上的非磁性涂镀层 涂镀层厚度测量磁性法
Non-magnetic coatingson magnetic substrates - Measurement of coating thickness -Magnetic method (ISO 2178:1982); German version EN ISO2178:1995 |
| DIN EN ISO2360-1995 | 非磁性基體金属上的非导體涂层 涂层厚度测量涡流法
Non-conductive coatingson non-magnetic basis metals - Measurement of coating thickness -Eddy current method (ISO 2360:1982); German version EN ISO2360:1995 |
| DIN EN ISO2361-1995 | 磁性和非磁性基體上的镍電镀层 镀层厚度测量磁性法
Electrodeposited nickelcoatings on magnetic and non-magnetic substrates - Measurement ofcoating thickness - Magnetic method (ISO 2361:1982); German versionEN ISO 2361:1995 |
| DIN EN ISO9934-1-2002 | 无损检测 磁粉检测第1部分:一般原理
Non-destructivetesting - Magnetic particle testing - Part 1: General principles(ISO 9934-1:2001); German version EN ISO 9934-1:2001 |
| DIN EN ISO9934-2-2003 | 无损检测 磁粉检测第2部分:探测介质
Non-destructivetesting - Magnetic particle testing - Part 2: Detection media (ISO9934-2:2002); German version EN ISO 9934-2:2002 |
| DIN EN ISO9934-3-2002 | 无损检测 磁粉检测第3部分:设备
Non-destructivetesting - Magnetic particle testing - Part 3: Equipment (ISO9934-3:2002); German version EN ISO 9934-3:2002 |
| 英國: |
| BS 1881-204-1988 | 混凝土试验-電磁式保护层厚度计应用的推荐方法 |
| BS 3680/3H:1993 | 利用線圈全部長、宽的電磁方法 |
| BS 3683-2-1985 | 无损检测术语 磁粉探伤
Glossary of terms used innon-destructive testing - Magnetic particle flaw detection |
| BS 3683Pt.5-83 | 涡流检测名词术语 |
| BS 3889Pt.2A-86(1991) | 管道和管子无损检测方法锻钢管的涡流检测 |
| BS 3889Pt.2B-82 | 管道和管子无损检测方法有色金属管的涡流检测 |
| BS4069-82 | 磁粉探伤用磁粉及磁悬液(INDT,84-2) |
| BS4080/1: | 用磁粉探伤显示表面缺陷 |
| BS4397-69 | 焊缝的磁粉检测方法(WSTS,85-4) |
| BS 4408Pt.1-69 | 混凝土复盖层的電磁测量方法 |
| BS4489:1984 | 无损检测中评定黑光的方法 |
| BS5044-73(1987) | 磁粉探伤用反差增强涂料 |
| BS5138-74(2000) | 精加工整體锻造及落锤锻曲轴的磁粉检验 |
| BS 5411Pt.3-84 | 非磁性基體上非导電复盖层厚度的涡流检测 |
| BS 5411Pt.9-84 | 非磁性基體上镀镍层厚度的磁性检测方法 |
| BS 5411Pt.11-84 | 磁性基體上非磁性复盖层厚度的磁性测量方法 |
| BS6072-81(1986) | 缺陷的磁粉检验方法(81年版在INDT 84-2) |
| BS 6404-5-1995 | 磁性材料 永磁(硬磁)材料磁性能测量方法
Magnetic materials- Permanent magnet (magnetically hard) materials - Methods ofmeasurement of magnetic properties |
| BS DD ENV50166-1-1995 | 人體電磁场照射 低频(0 Hz 至 10kHz)
Human exposure toelectromagnetic fields - Low frequency (0 Hz to 10 kHz) |
| BS DD ENV50166-2-1995 | 人體電磁场照射 高频(10 kHz 至 300GHz)
Human exposure toelectromagnetic fields - High frequency (10 kHz to 300 GHz) |
| BS M35 | 材料及工件的磁粉检验 |
| BS EN 1290-1998 | 焊缝的无损检验 焊缝的磁粉检验
Non-destructive examination of welds -Magnetic particle examination of welds |
| BS EN 1291-1998 | 焊缝的无损检验 焊缝的磁粉检验验收等级
Non-destructiveexamination of welds - Magnetic particle testing of welds -Acceptance levels |
| BS EN 1330-5-1998 | 无损检测术语-涡流检测 Non-destructivetesting - Terminology - Terms used in eddy current testing |
| BS EN 1369-1997 | 铸造-磁粉检验 Founding - Magneticparticle inspection |
| BS EN 10228-1-1999 | 锻钢件无损检测-磁粉检验Non-destructive testing of steelforgings - Magnetic particle inspection |
| BS EN 10246-1-1996 | 钢管的无损检测-铁磁性无缝与焊接（埋弧焊除外）钢管验证水压试验的自动電磁检测
Non-destructive testing of steel tubes - Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness |
| BS EN 10246-2-2000 | 钢管的无损检测-奥氏體与奥氏體-铁素體无缝与焊接（埋弧焊除外）钢管验证水压试验的自动涡流检测 |
| BS EN 10246-3-2000 | 钢管的无损检测-探测无缝与焊接（埋弧焊除外）钢管不完整性的自动涡流检测
Non-destructive testing of steel tubes - Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections |
| BS EN 10246-4-2000 | 钢管的无损检测-铁磁性无缝钢管横向不完整性自动全圆周磁探头/漏磁检测
Non-destructive testing of steel tubes -Automatic full peripheral magnetic transducer/flux leakage testingof seamless ferromagnetic steel tubes for the detection oftransverse imperfections |
| BS EN 10246-5-2000 | 钢管的无损检测-铁磁性无缝与焊接（埋弧焊除外）钢管纵向不完整性自动全圆周磁探头/漏磁检测 Non-destructive testing of steel tubes - Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal imperfections |
| BS EN 10246-12-2000 | 钢管的无损检测探测无缝和焊接铁磁钢管表面不完整性的磁粉检验
Non-destructive testing of steel tubes - Magnetic particleinspection of seamless and welded ferromagnetic steel tubes for thedetection of surface imperfections |
| BS EN 10246-18-2000 | 钢管的无损检测探测无缝和焊接铁磁钢管管端层状不完整性的磁粉检验
Non-destructive testing of steel tubes - Magnetic particleinspection of tube ends of seamless and welded ferromagnetic steeltubes for the detection of laminar imperfections |
| BS EN 12084-2001 | 无损检测-涡流检测-一般原理与指南
Non-destructive testing - Eddy current testing - Generalprinciples and guidelines |
| BS EN ISO 2178-1995 | 磁性基體上非磁性涂层的厚度测量-磁性法
Non-magnetic coatings on magnetic substrates - Measurement ofcoating thickness - Magnetic method |
| BS EN ISO 2360-1995 | 非磁性金属基體上非导電涂层的厚度测量-涡流法
Non-conductive coatings on non-magnetic basis metals - Measurement of coating thickness - Eddy current method |
| BS EN ISO 2361-1995 | 磁性和非磁性基體上镍镀层的厚度测量-磁性法
Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness - Magnetic method |
| BS EN ISO9934-1-2001 | 无损检测 磁粉检测 一般原理Non-destructive testing - Magneticparticle testing - General principles |
| BS EN ISO9934-2-2002 | 无损检测 磁粉检测 探测介质Non-destructive testing - Magneticparticle testing - Detection media |
| BS EN ISO9934-3-2002 | 无损检测 磁粉检测 设备Non-destructive testing - Magneticparticle testing - Equipment |
| 法國: |
| NFA04-101-64 | 冶金产品磁粉检测(磁悬液检测) |
| NFA04-121-74 | 钢制長条形制品表面缺陷的磁粉检验 |
| NF A04-193-1997 | 铸造 磁粉检验 Founding - Magnetic particle inspection. |
| NF A05-115-1999 | 铜及铜合金 管子的涡流检测Copper and copper alloys. Eddy currenttest for tubes. |
| NF A09-020-5-1998 | 无损检测术语第5部分:涡流检测
Non-destructivetesting. Terminology. Part 5 : terms used in Eddy Currenttesting. |
| NFA09-125-82 | 冶金制件磁粉探伤的一般原理 |
| NF A09-160-2001 | 无损检测 涡流检测一般原理和指南
Non-destructivetesting - Eddy current testing - General principles andguidelines. |
| NF A09-590-1-2002 | 无损检测 磁粉检测第1部分:一般原理
Non-destructivetesting - Magnetic particle testing - Part 1 : generalprinciple. |
| NF A09-590-3-2002 | 无损检测 磁粉检测第3部分：设备
Non-destructivetesting - Magnetic particle testing - Part 3 : equipment. |
| NFA49-871-81 | 铁磁性钢管纵向缺陷的探头检漏法检测 |
| NFA49-872-83 | 穿过式線圈法的钢管涡流探伤 |
| NF A49-875-1-1996 | 钢管的无损检测第1部分:无缝和焊接铁磁钢管(埋弧焊除外)验证水压试验的自动電磁检测 Non destructive testing of steels tubes. Part 1 : automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness. |
| NF A49-875-2-2000 | 钢管的无损检测第2部分:无缝和焊接奥氏體和奥氏體铁素體钢管(埋弧焊除外)验证水压试验的自动涡流检测 Non-destructive testing of steel tubes - Part 2 :automatic eddy current testing of seamless and welded (exceptsubmerged arc-welded) austenitic and austenitic-ferritic steeltubes for verification of hydraulic leak-tightness. |
| NF A49-875-3-2000 | 钢管的无损检测第3部分:探测无缝和焊接钢管(埋弧焊除外)不完整性的自动涡流检测 Non-destructive testing of steel tubes - Part 3 : automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections. |
| NF A49-875-4-2000 | 钢管的无损检测第4部分:探测无缝铁磁钢管横向不完整性的自动全圆周磁探头/磁漏检测 Non-destructive testing of steel tubes - Part 4 : automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections. |
| NF A49-875-5-2000 | 钢管的无损检测第5部分:探测无缝和焊接(除埋弧焊)铁磁钢管纵向不完整性的自动全圆周磁探头/漏磁检测 Non-destructive testing of steel tubes - Part 5 :automatic full peripheral magnetic transducer/flux leakage testingof seamless and welded (except submerged arc welded) ferromagneticsteel tubes for the detection of longitudinal imperfections. |
| NF A49-875-12-2000 | 钢管的无损检测第12部分:探测无缝和焊接铁磁钢管表面不完整性的磁粉检验
Non-destructive testing of steel tubes - Part 12 : magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections. |
| NF A49-875-18-2000 | 钢管的无损检测第18部分:探测无缝和焊接铁磁钢管管端层状不完整性的磁粉检验 Non-destructive testing of steel tubes - Part 18 : magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections. |
| NF A89-550-1998 | 焊缝的无损检验 焊缝的磁粉检验
Non-destructive examination of welds -Magnetic particle examination of welds. |
| NF A89-550/A1-2002 | 焊缝的无损检测 焊缝的磁粉检测
Non-destructive testing of welds -Magnetic particle testing of welds. |
| NF A89-551-1998 | 焊缝的无损检验 焊缝的磁粉检测验收等级
Non-destructiveexamination of welds - Magnetic particle testing of welds -Acceptance levels. |
| NF A89-551/A1-2002 | 焊缝的无损检测 焊缝的磁粉检测验收等级
Non-destructivetesting of welds - Magnetic particle testing of welds - Acceptancelevels. |
| NF A91-112-1995 | 磁性基體上的非磁性涂层 涂层厚度测量磁性法
Non-magnetic coatingson magnetic substrates. Measurement of coating thickness. Magneticmethod. |
| NFA91-113-1995 | 非磁性基體金属上的非导電涂层 涂层厚度测量涡流法
Non-conductive coatingson non-magnetic basis metals. Measurement of coating thickness.Eddy current method. |
| NF A91-120-1995 | 磁性和非磁性基體上的镍電镀层 镀层厚度测量磁性法
Electrodeposited nickelcoatings on magnetic and non-magnetic substrates. Measurement ofcoating thickness. Magnetic method. |
| NF F01-141-1987 | 铁路車辆 传动齿轮 磁检验Rolling stock. Running gear.Magnetoscopic examination. |
| 前苏联: |
| гост19793-74 | 磁力探伤机及磁化设备一般技术要求 |
| гост21105-75 | 磁粉检测方法 |
| ПИ1.2.238-83 | 材料与零件质量的涡流无损检测 |
| РТМ1.2.020-81 | 航空零件的磁粉法检验 |