國际标准: |
IIW DOCV-649-79 | 符合使用要求的焊缝检验标准(NDT,80-2) |
IIW DOC VF-130-82 | 钢材電弧焊接头的质量等级 (INDT,85-3) |
IAEA-TECDOC-628:1991 | 國际原子能机构无损检测人员培训指南 |
ISO/TC135/SC7N35-E | 无损检测人员资格鉴定通则草案(NDT,88-3) |
ISO1463:2003 | 金属和氧化物涂层涂层厚度测量 显微镜法 Metallic and oxide coatings -- Measurement of coating thickness-- Microscopical method |
ISO2064:1996 | 金属和其他无机涂层厚度测量的定义和惯例 Metallic and other inorganic coatings -- Definitions andconventions concerning the measurement of thickness |
ISO2128:1976 | 铝和铝合金的阳极氧化处理-阳极氧化层厚度测定-用裂束(SPLIT-BEAM)显微镜作无损测量 Anodizing of aluminium and its alloys -- Determination ofthickness of anodic oxide coatings -- Non-destructive measurementby split-beam microscope |
ISO2553:1992 | 图纸上熔焊、硬钎焊和软钎焊接头的符号表示法(TC44) |
ISO2604/1:1975 | 承压钢制件-质量要求第1部分: 锻件 |
ISO2604/2:1975 | 承压钢制件-质量要求第2部分: 轧制和冷拔无缝管 |
ISO2604/3:1975 | 承压钢制件-质量要求第3部分: 電阻焊管和感应焊管 |
ISO2604/5:1978 | 承压钢制件-质量要求第5部分: 纵焊奥氏體不锈钢管 |
ISO2604/6:1978 | 承压钢制件-质量要求第6部分: 埋弧纵焊钢管和埋弧螺旋焊钢管 |
ISO2819:1980 | 在金属基體上電沉积和化學沉积覆盖层附着力试验可用方法的评述 |
ISO2855:1976 | 放射性材料 包装内存物泄漏和辐射泄漏的检测 |
ISO3057:1998(E) | 无损检测-表面检验的金相复型技术 Non-destructive testing -- Metallographic replicatechniques of surface examination |
ISO3058:1998(E) | 无损检测-目视检验的器具--低倍放大镜的选择 Non-destructive testing -- Aids to visual inspection -- Selection of low-power magnifiers |
ISO3059:2001 | 无损检测--渗透检测和磁粉检测-观察条件 |
ISO3183:1996 | 石油天然气工业输送钢管交货技术条件 |
ISO3529:1981 | 真空技术-词汇(TC112) **部分: 一般术语( 三國文字版本) **部分: 真空泵和有关名词( 三國文字版本) 第三部分: 真空计和有关名词( 三國文字版本) |
ISO3530:1979 | 真空技术--质谱仪型检漏仪校准 Vacuum technology -- Mass-spectrometer-type leak-detectorcalibration |
ISO3834/1:1994 | 金属材料熔焊的质量要求第1部分:选择和使用导则 |
ISO3834/2:1994 | 金属材料熔焊的质量要求第2部分:**的质量要求 |
ISO3834/3:1994 | 金属材料熔焊的质量要求第3部分:标准的质量要求 |
ISO3834/4:1994 | 金属材料熔焊的质量要求第4部分:基本的质量要求 |
ISO3868:1976 | 金属和其他无机涂层涂层厚度测量 裴索多光束干涉测量法 Metallic and other non-organic coatings -- Measurement of coating thicknesses -- Fizeau multiple-beam interferometry method |
ISO3882:2003 | 金属和其它无机涂层厚度测量方法述评 Metallic and other non-organic coatings -- Review of methods ofmeasurement of thickness |
ISO4386 | 普通轴承--金属的多层普通轴承 |
ISO4518:1980 | 金属涂层 涂层厚度测量纵断面测量法 Metallic coatings -- Measurement of coating thickness --Profilometric method |
ISO4522-1:1985 | 金属涂层银和银合金電镀层厚度检验法 **部分:镀层厚度测定 Metallic coatings -- Test methods forelectrodeposited silver and silver alloy coatings -- Part 1:Determination of coating thickness |
ISO4524-1:1985 | 金属涂层金和金合金電镀层厚度检验法 **部分:镀层厚度测定 Metallic coatings -- Test methods forelectrodeposited gold and gold alloy coatings -- Part 1:Determination of coating thickness |
ISO/TR4826:1979 | 密封放射源泄漏试验方法 |
ISO5725/1:1994 | 测量方法和结果的准确度(正确度和精密度)第1部分:一般原理和定义 |
ISO5725/2:1994 | 测量方法和结果的准确度(正确度和精密度)第2部分:标准测量方法 确定可重复性和可再现性的基本方法 |
ISO5725/3:1994 | 测量方法和结果的准确度(正确度和精密度)第3部分:标准测量方法 精密度的中间级测量 |
ISO5725/4:1994 | 测量方法和结果的准确度(正确度和精密度)第4部分:标准测量方法 正确度测定基本方法 |
ISO5725/5:1998 | 测量方法和结果的准确度(正确度和精密度)第5部分:标准测量方法 精密度测量的另一可供选择方法 |
ISO5725/6:1994 | 测量方法和结果的准确度(正确度和精密度)第6部分:标准测量方法 准确值在实际中的采用 |
ISO5817:1992 | 钢中弧焊接头-缺陷质量等级控制 |
ISO6406:1992 | 无缝钢气瓶的定期检查和试验 |
ISO6520/1:1998(B) | 焊接和有关工艺 金属材料中几何缺陷的分类第1部分:熔焊 |
ISO 6520/2:2001 | 焊接和有关工艺 金属材料中几何缺陷的分类 第2部分:压力焊接 |
ISO8591/1:1989 | 航空航天 变形铝和铝合金 检查、试验和补充要求第1部分:一般要求 |
ISO8639:2000 | 玻璃增强热固塑料输送管接头的密封性试验方法 |
ISO9220:1988 | 金属涂层 涂层厚度测量扫描電子显微镜法 Metallic coatings -- Measurement of coating thickness --Scanning electron microscope method |
ISO9335:1995 | 光學和光學仪器光转移函数的原理和测量程序 |
ISO9712:2005 | 无损检验--人员的资格鉴定和认证 Non-destructive testing -- Qualification and certificationof personnel |
ISO9978:1992 | 辐射防护--密封放射性源--泄漏试验方法 |
ISO10042:1992 | 铝及其可焊合金的電弧焊接头--缺陷质量等级控制 |
ISO10049:1992 | 铝合金铸件--目视法评定气孔率 Aluminium alloy castings -- Visual method for assessingthe porosity |
ISO10076:1991 | 金属粉末用液體中重力沉降及衰减测量确定颗粒尺寸分布 |
ISO10460:1993 | 焊接碳钢气瓶-周期性检查和试验 |
ISO10461:1993 | 无缝铝合金气瓶-周期性检查和试验 |
ISO11463:1995 | 金属和合金的腐蚀点腐蚀的评定 |
ISO11484:1994 | 承压钢管无损检测人员资格鉴定与认证 Steel tubes for pressure purposes -- Qualification and certification of non-destructive testing (NDT) personnel |
ISO11537:1998 | 无损检测--热中子照相检测--一般原理和基本规则 |
ISO11843/1:1997(B) | 检测能力第1部分:术语和定义 |
ISO11971:1997 | 铸钢件表面质量的目视检验 Visual examination of surface quality of steel castings |
ISO 12715:1999 | 无损检测--接触式传感器光束轮廓特性的检测程序和基准块 |
ISO 12721:2000 | 无损检测--热中子辐射照相检测--射線束L/D比率的测定 |
ISO 13919/1:1996 | 電子束和激光束焊接接头 缺陷等级的控制第1部分:钢 |
ISO 15184:1998 | 涂料 检测方法 |
ISO 15529:1999 | 光學和光學仪器 光學转移函数取样成像系统调制转移函数(MTF)测量 |
ISO 16063/1:1998 | 振动和冲击传感器校准方法 基本概念 |
ISO 16063/11:1999 | 振动和冲击传感器校准方法通过激光干涉进行**振动校准 |
ISO 17025:1999 | 测试和校准试验室能力的一般要求 |
ISO/IEC 17020-1998 | 各种检验机构运作的一般标准 |
ISO/IEC 17025-1999 | 试验与校正实验室能力的一般要求 |
ISO/IEC 17024 | 一致性评估-人员资格认证机构的一般要求 Conformityassessment-General requirements for bodies operating certificationof persons |
ISO 17635:2003 | 焊缝无损检测--金属材料熔化焊焊缝的一般规则 Non-destructive testing of welds -- General rules for fusion welds in metallic materials |
ISO 17637:2003 | 焊缝无损检测--熔化焊焊缝的目视检测 Non-destructive testing of welds -- Visual testing offusion-welded joints |
ISO/TS 18173:2005 | 无损检测--一般术语和定义 Non-destructive testing -- General terms and definitions |
ISO 19959:2005 | 钢、镍合金、镍钴合金熔模铸造件表面状态的目视检验 Visual examination of the surface condition of investment castings -- Steel, nickel alloys and cobalt alloys |
ISO 20807:2004 | 无损检测--有限应用无损检测的人员资格 Non-destructive testing -- Qualification of personnel forlimited application of non-destructive testing |
ISO/CD TS 22809 | 无损检测--资格鉴定考试中使用试样的不连续性 |
ISO/TR 25107:2006 | 无损检测--无损检测培训课程指南 Non-destructive testing -- Guidelines for NDT trainingsyllabuses |
ISO/TR 25108:2006 | 无损检测--无损检测人员培训机构指南 Non-destructive testing -- Guidelines for NDT personneltraining organizations |
國际電工委员会标准: |
IEC 706/6:1994 | 设备可维修性指南 第6部分:第9节可维修性评价中的统计學方法 |
前苏联标准: |
ΓΟСΤ18353-79 | 无损检测类型与方法分类 |
欧洲标准化委员会标准: |
EN 473:2000 | 无损检测人员的资格鉴定与认证-总则 Non-destructive testing-Qualification and certification of NDTpersonnel-general principles |
EN 729/1: | 金属材料熔焊的质量要求 选择和使用导则 |
EN 729/2: | 金属材料熔焊的质量要求 **的质量要求 |
EN 729/3: | 金属材料熔焊的质量要求 标准的质量要求 |
EN 729/4: | 金属材料熔焊的质量要求 基本的质量要求 |
EN 970:1997 | 熔焊的无损检测 目视检测 |
EN 1330/1:1998 | 无损检测词汇 第1部分:一般术语Non-destructivetesting-Terminology-Part 1:List of general terms |
EN 1330/2:1998 | 无损检测词汇第2部分:无损检测方法通用术语 Non-destructive testing-Terminology-Part 2:Terms common to thenon-destructive testing methods |
EN 1330/8:1998 | 无损检测词汇第8部分:密封性检测所用术语 Non-destructive testing-Terminology-Part 8:Terms used in leaktightness testing |
EN 1330/10:2003 | 无损检测词汇第10部分:目视检测 Non-destructivetesting-Terminology-Part 10:Terms used in visual testing |
EN 1370:1996 | 用视觉比较器检查铸件表面粗糙度 |
EN 1518:1998 | 无损检测 泄漏检测质谱检漏仪特性 Non-destructivetesting-Leak tesing-Characterization of mass spectrometer leakdetectors |
EN1593:1999/A1:2003 | 无损检测 泄漏检测 气泡检测法 Non-destructive testing-Leaktesing-Bubble emission techniques |
EN 1738: | 用经热压处理加气多孔混凝土制作的无负载钢筋构件中钢应力的测定 |
EN1779:1999/A1:2003 | 无损检测 泄漏检测选择方法和技术的准则 Non-destructivetesting-Leak tesing-Criteria for method and techniqueselection |
EN 2098/1: | 钛和耐热合金锻件的检测要求第1部分:一般要求 |
EN 2098/2: | 钛和耐热合金锻件的检测要求第2部分:薄板、带材和中厚板的检测要求 |
EN 2098/3: | 钛和耐热合金锻件的检测要求第3部分:棒材和型材的检测要求 |
EN 2155: | 用于飞机窗玻璃的透明材料检测方法 |
EN 25817 | 钢電弧焊焊接接头缺陷评定等级导则(同ISO5817) |
EN 4179:2000 | 航空航天系列:无损检测人员的资格鉴定与认证 |
EN 10256:2000 | 钢管的无损检测-I级和II级无损检测人员资格鉴定与权限 |
EN 12062:1998(2003) | 焊接的无损检测用于金属材料的一般准则 Non-destructiveexamination of welds-General rules for metallic materials |
EN 12373:1998 | 阳极化氧化覆盖层厚度测定用裂束显微镜无损测量 |
EN 12454:1998 | 砂模钢铸件表面缺陷的目视检验 |
EN 12799:2000 | 硬钎焊接头的无损评价 |
EN 12814/5:2000 | 热塑半成品接头的检测第5部分:显微镜检验 |
EN13018:2001/A1:2003 | 无损检测 目视检验 一般原理Non-destructive testing-Visualtesting-General principles |
EN 13100/1:2000 | 热塑半成品接头的无损检测第1部分:目视检验 |
EN13184:2001/A1:2003 | 无损检测 泄漏检测 压力变化法Non-destructive testing-Leaktesing-Pressure change method |
EN13185:2001/A1:2003 | 无损检测 泄漏检测 示踪气體法Non-destructive testing-Leaktesing-Tracer gas method |
EN13192:2001/AC:2003 | 无损检测 泄漏检测参考泄漏气體的校准 Non-destructivetesting-Leak tesing-Calibration of reference leaks for gases |
EN 13625:2001 | 无损检测 泄漏检测气體泄漏测量仪表选择指南 Non-destructive testing-Leak tesing-Guide to the selection ofinstrumentation for the measurement of gas leakage |
EN 13927:2003 | 无损检测 目视检测 设备Non-destructive testing-Visualtesting-Equipment |
EN 26520:1991 | 金属熔焊缺陷分类及解说 |
EN 45003: | 校准和检测试验室认可系统作业和判别的一般要求 |
EN 45004: | 不同类型物體完成检查作业的一般准则 |
EN 45010: | 评定和认可认证系统的一般要求 |
EN 45013:1989 | 从事人员认证工作的认证实體一般准则 |
EN 61300/3: | 纤维光學互连装置和无源元件 检验和测量 |
EN 61300/3-1: | 纤维光學互连装置和无源元件 目视检验 |
EFNDT/ECP/00001e | 欧洲无损检测联盟(EFNDT):欧盟认证程序-实践考试试件的技术条件 |
CEN/TC 138 | 无损检测 Non-destructive testing |
CEN/TR 14748:2004 | 无损检测 无损检测的鉴定方法 Non-destructive testing-Methodologyfor qualification of non-destructive tests |
CR 13935:2000 | 无损检测 普通NDE数据格式模型Non-destructive testing-Generic NDEdata format model |